REPAIR KITS
......................................................................................

Repair kits are sold for both the 1" and 1/2" Standard and High Temperature Hudson Valves. The repair kits include the following parts:
Part DescriptionMaterial1" Valve Parts
(order now)
1/2" Valve Parts
(order now)
Diaphragm Retainer RingABS PlasticP03P03-S
Control DiaphragmSiliconeP05P05-S
Diaphragm StemABS PlasticP05AP05A-S
Diaphragm StrainerABS PlasticP05BP05B-S
FloatABS PlasticP07P07-S
Shut-Off PadSiliconeP08 *P08-S *
Screen304 Stainless SteelP09P09-S

* P08 and P08-S are identical items.



order now

order now
HIGH TEMPERATURE REPAIR KITS

The High Temperature repair kits include the same parts as the Standard Hudson Valve repair kits. These high-temp repair parts will operate in fluid temperatures up to 150°F.

CONTINUOUS FLOW DISC

Instructions For Installing Continuous Flow Disc in a 1" Hudson Valve

The Continuous Flow Disc is an accessory that allows for a slow trickle of water to flow through the valve to help prevent freezing. It is only needed during the freezing season. When installed it will allow the valve to overflow the tank, so an overflow tank is often used in conjunction with it. The amount of water that the disc will allow through depends on individual water pressure. If you have low water pressure and you need it to let more water through, you can use a file to make the slits larger.

To install:
* Remove the cap from the body of valve
* Remove the strainer from the diaphragm stem
* Slide the continuous flow disc onto diaphragm stem, flat side down
* Replace strainer and cap


order now

MOUNTING BRACKET

Glass filled nylon 6/6 construction with thumb screw for quick and easy mounting of the Hudson Valves to portable tanks and troughs at the end of standard 3/4" water hose. Includes 1" or 1/2" PVC nipple, elbow and 3/4" hose adapter.


order 1"

order 1/2"

OTHER PARTS AS NEEDED
......................................................................................

order
1"
order
1/2"
DescriptionMaterial
P02Continuous Flow DiscABS Plastic
P03HTP03HT-SHigh Temp Retainer RingHigh-Heat ABS Plastic
P05HTP05HT-SHigh Temp DiaphragmHigh-Heat ABS Plastic & Silicone
P07HTP07HT-SHigh Temp FloatHigh-Heat ABS Plastic

Your Hudson Valve is guaranteed for two years when used under normal operating conditions. Malfunctioning parts will be repaired or replaced without charge when mailed prepaid back to the manufacturer. Please show proof of purchase, including date of purchase, and send $5.00 per valve to cover postage and handling. (Do not send cash).

HOME / PRODUCTS / CATALOG DISTRIBUTORS / PRICING & ORDERING / FLOW-RATE CHARTS / TROUBLESHOOTING / CONTACT US

Site designed and maintained by Saba Agency.